Alfa Laval Unique SSV Tangential
The Unique Single Seat Tangential valve meets the highest demands of your process in terms of hygiene and safety. Built on the well-proven Unique SSV platform it offers complete drainability of the valve body on horizontally mounted valves. It can be configured as a shut-off valve with two (2) or three (3) ports or as a change-over valve with three (3) to five (5) ports.
Product Description
Working principle
The valve is a pneumatic seat valve in a hygienic and modular design remote-controlled by means of compressed air. It has few and simple moveable parts which results in a very reliable valve and low maintenance cost.
Standard design
The Unique SSV Tangential valve comes in a one or two body configuration. With its module built structure it is designed for flexibility and easy customization through the electronic configurator. The valve features an optimized life span of the seals through a defined compression design. The actuator is connected to the valve body using a yoke and all components are assembled with clamp rings.
Technical Data
Temperature
Temperature range: . . . . . . . . . . . . . -10°C to +140°C (EPDM)
Pressure
Max. product pressure . . . . . . . . . . 1000 kPa (10 bar)
Min. product pressure: . . . . . . . . . . Full vacuum
Air pressure: . . . . . . . . . . . . . . . . . 500 to 700 kPa (5-7 bar)
Valve Body Combinations
Actuator function
– Pneumatic downward movement, spring return.
– Pneumatic upward movement, spring return.
– Pneumatic upward and downward movement (A/A).
– Actuator for intermediate position of the valve plug (optional)
Physical Data
Materials
Product wetted steel parts: . . . . . . . . 1.4404 (316L)
Other steel parts: . . . . . . . . . . . . . . 1.4301 (304)
External surface finish . . . . . . . . . . . Semi-bright (blasted)
Internal surface finish . . . . . . . . . . . . Bright (polished), Ra < 0.8 µm
Other product wetted seals: . . . . . . . EPDM
Other seals: . . . . . . . . . . . . . . . . . . NBR
Options
A. Weld ends or connection types other than Tri-Clamp.
B. Control and Indication: IndiTop, ThinkTop or ThinkTop Basic.
C. Product wetted seals in HNBR or FPM.
D. Plug seal HNBR, FPM or TR2 (floating PTFE design).
E. High pressure actuator.
F. NO or A/A actuator.
G. Maintainable actuator.
H. External surface finish bright.
Note!
For further details, see instruction ESE00609.
Other valves in the same basic design
The valve range includes several purpose built valves. Below are some of the valve models available, though please use the Alfa Laval computer aided selection tool (Anytime configurator) for full access to all models and options.
– Reverse acting valve.
– Long stroke valve.
– Manually operated valve.
– Aseptic valve.
The actuator comes with a 5 years warranty.
Dimensions
Please note!
Opening/closing time will be effected by the following:
– The air supply (air pressure).
– The length and dimensions of the air hoses.
– Number of valves connected to the same air hose.
– Use of single solenoid valve for serial connected air actuator functions.
– Product pressure.
Air Connections Compressed air:
R 1/8″ (BSP). Internal thread.
Pressure drop/capacity diagrams
Note!
For the diagrams the following applies:
Medium: Water (20°C)
Measurement: In accordance with VDI2173
Pressure drop can also be calculated in Anytime configurator.
Pressure drop can also be calculated with the following formula:
Q = Kv x √∆p
Where
Q = Flow in m3/h.
Kv = m3/h at a pressure drop of 1 bar (see table above).
∆ p = Pressure drop in bar over the valve.
Where
Q = Flow in m3/h.
Kv = m3/h at a pressure drop of 1 bar (see table above).
∆ p = Pressure drop in bar over the valve.
2.5″ shut-off valve, where Kv = 111 (See table above).
Q = Kv x √∆p
40 = 111 x √∆p
Pressure data for Unique Single Seat Valve Tangential body/Tank valve
