Tetra Pak Constant Pressure Valves CPM
CPMI-2, CPMI-D60 and CPMO-2 are sanitary constant-pressure valves for use in stainless steel pipe systems.
CPMI-2 and CPMI-D60 (Constant-Pressure Modulating Inlet) maintain a constant pressure in the process line at the inlet side of the valve. Typical applications of CPMI-2 and CPMI-D60 are after separators, heat exchangers etc. and as overflow valves.
Product Description
CPM
CPMO-2 (Constant-Pressure Modulating Outlet) maintains a constant pressure in the process line at the outlet side of the valve. Typical applications of CPMO-2 are before filling/bottling machines etc.
CPMI-2, CPM-I-D60 and CPMO-2 are remote-controlled by means of compressed air. The valves operate without a transmitter in the product line and require only a pressure-regulating valve for the compressed air and a pressure gauge in the product line. A diaphragm/valve plug system reacts immediately to any alteration of the product pressure and changes position so that the preset pressure is maintained.
CPMI-2 and CPM-I-D60 open at increasing product pressure and vice versa. CPMO-2 closes at increasing product pressure and vice versa.
Standard Design
The CPMI-2 and CPMO-2 consist of a valve body with valve seat, cover, a valve plug with a diaphragm unit and a clamp. The diaphragm unit consists of a stainless steel disc, which is divided into sectors, and of flexible diaphragms, which are placed on each side of the sectors. The cover and the valve body are clamped together. The valve body and the seat are welded together.
The CPM-I-D60 consists of upper and lower valve bodies, an inlet tube, a cover, a valve plug with diaphragm unit and clamps. The diaphragm unit consists of two flexible diaphragms supported by 12 stainless steel sectors in between them. The cover and the valve bodies are clamped together.
CPM – Inch
CPMI-2
Connection: Welding ends
Material: 1.4404 (316L)
Seals, lower diaphragm: EPDM/PTFE
Other seals: NBR
CPMI-D60
Connection: Welding ends
Material: 1.4404 (316L)
Seals, lower diaphragm: EPDM/PTFE
Other seals: NBR
CPMO-2
Connection: Welding ends
Material: 1.4404 (316L)
Seals, lower diaphragm: EPDM/PTFE
Other seals: NBR
CPM – DIN
CPMI-2
Connection: Welding ends
Material: 1.4404 (316L)
Seals, lower diaphragm: EPDM/PTFE
Other seals: NBR
CPMO-2
Connection: Welding ends
Material: 1.4404 (316L)
Seals, lower diaphragm: EPDM/PTFE
Other seals: NBR
CPM – Accessories
Air pressure regulating valve
Range: 0-8 bar
Air throttling valve
Booster for CPM
Booster 3 for cover with thread